BBDQC - AGS GLOSS BLACK LACQ.

  • MSDS: BBDQC
  • Manufacturer: AMES SUPPLY CO
  • Product Name: AGS GLOSS BLACK LACQ.
  • National Stock Number: 5970-00D000965
Product Identification

Product ID:AGS GLOSS BLACK LACQ.
MSDS Date:01/01/1987
FSC:5970
NIIN:00D000965
MSDS Number: BBDQC

Responsible Party
AMES SUPPLY CO.

Emergency Phone: 312-964-2440

Cage: EO069

Contractor
AMES SUPPLY CO.

Cage: EO069

Ingredients

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 15%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM/300STEL;9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ETHYL ACETATE (SARA III)

CAS: 141-78-6

RTECS: AH5425000

Fraction By Weight: <5%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 20%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ETHOXYPROPIONATE(CAS#763-69-9)

CAS: 763-69-9

RTECS: UF3325000

Fraction By Weight: <5%

ACGIH TLV: 50 PPM


METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: 15%

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of
Overexposure:ANESTHETIC,IRRITATING,LIGHT-HEADEDNESS,STAGGERING
GAIT,POSSIBLE NAUSEA,HARMFUL OR FATAL IF SWALLOWED

First Aid

First Aid:SKIN:WASH W.SOAP & H*2O. EYES:FLUSH W. H*2O. INGESTED:DON'T
INDUCE VOMITING. INHALED:REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF
NEED. KEEP WARM & QUIET. REMOVE CONTAMINATED CLOTHING. NEVER GIVE
ANYTHING BY MOUTH TO UNCONSCIOUS PERSON.

Fire Fighting

Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:COOL CONTR W. WATER. APPLY FROM DISTANCE.
AVOID END OF TK.
Unusual Fire/Explosion Hazard:DO NOT SPRAY NEAR OPEN FLAME.KEEP AT ROOM
TEMP AS EXPOSURE TO DIRECT SUNLIGHT,HEAT MAY CAUSE BURSTIN

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION,VENTILATE,AVOID
BREATHING VAPORS & REMOVE WITH INERT ABSORBENT.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F.KEEP AT ROOM
TEMP AS EXPOSURE TO DIRECT SUNLIGHT OR HEAT MAY CAUSE BURSTING.
Other Precautions:DO NOT PUNCTURE.DO NOT SPRAY NEAR FIRE OR OPEN FLAME.

Exposure Controls

Respiratory Protection:IF EXCED TLV,NIOSH/MSHA APPR SELF-CNTND BRTHG
APP (POS PR MODE)
Ventilation:LOCAL EXHAUST
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE
Supplemental Safety and Health
MSDS DATED 1-3-86. OTHER INGRED INCLUDE:BUTYL ACETATE(<5%),ISOBUTYL
ACETATE(<5%),ETHANOL SDS JAYSOL(<5%),TOLUOL(<5%),XYLOL(<5%) &
PROPANE(15%)-PROPELLENT.

Chemical Properties

HCC:V3
Vapor Density:>1
Evaporation Rate & Reference:>1,ETHER=1
Percent Volatiles by Volume:92

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:DO NOT STORE ABOVE 120F.
Hazardous Decomposition Products:CO,CO*2,HCL.

Disposal

Waste Disposal Methods:DO NOT INCINERATE-DISPOSE IN ACCORDANCE WITH
FEDERAL,STATE & LOCAL REGULATIONS REGARDING POLLUTION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.